Select Reorder URL
Specifies the URL that
Order Supplies at
links to in the left frame.
Regular
http://accessories.us.dell.com/sna
Premier
http://premier.dell.com
Print Server Settings
Use the
Print Server Settings
menu to set the type of printer interface and necessary conditions for
communications.
The following tabbed pages are displayed in the top of the Right Frame.
Print Server Reports
The
Print Server Reports
tab includes
Print Server Setup Page
,
NetWare Setup Page
, and
Alert Setup Page
.
Print Server Setup Page
Purpose:
To verify the current settings of TCP/IP protocol and printing ports. On this page, you can only verify the
settings of items. If you want to change the settings, go to the pages in the
Print Server Settings
tab.
Values:
Ethernet
*
1
Ethernet Settings
Displays the current settings of Ethernet transmission rate
and the duplex settings.
Current Ethernet Settings
Displays the current Ethernet settings.
MAC Address
Displays the printer's MAC address.
Wireless
Settings
*
2
SSID
Displays the name that identifies the network.
Network Type
Displays the network type from either the Ad-Hoc or
Infrastructure mode.
MAC Address
Displays the MAC address of the wireless printer adapter.
Link Channel
Displays the channel number of the connection.
Link Quality
Displays the quality of the connection.
TCP/IP
Settings
IP Mode
Displays the IP mode.
Host Name
Displays the host name.
IPv4 IP Address Mode
Displays the IP address mode.
IP Address
Displays the IP address.
Subnet Mask
Displays the subnet mask.
Содержание 3110 Color Laser
