dr
Output on the lower right corner of the paper.
format
specifies the contents and the order to output. This option is omissible.
If this option is omitted,
uh
is specified as the default value.
u
User name
h
Host name
t
Date and time
If the output contents are specified as
tuh
, it is output as follows.
Date and Time User:
username
Host:
hostname
page
specifies the page to output. This option is omissible.
f
Output the top page only.
(default in case of PostScriptfiles conversion)
a
Output all pages.
(default in case of Text files conversion)
Specify these options as follows.
In the case that convert text file, output the host name following the user name on the upper right
corner of the paper, output all pages.
(User name, Host name, all page output are default)
-Hd=
ur
-Hd=
ur:uh
-Hd=
ur:uh:a
In the case that convert PostScript file, output the host name following the date and time on the lower
left corner of the paper, output all pages (
a
option value is necessary because
output the top page
only
is default when PostScript file is converted.)
-Hd=
dl:th:a
NOTICE:
If the paper size is not specified, it outputs the header and footer at the position of A4 size
by default. If the paper size is specified by
lp
command, the output position of the header or footer is
not changed from the position of the paper size specified by txt2ps2. Specify the paper size at the
same time when the header and footer option is used. Sometimes all pages are not printed despite
specifying all page output when PostScript file conversion is specified. In such cases, specify
output
the top page only
. By using TZ environmental variable, specify time zone (GMT etc.).
Содержание 3110 Color Laser
