g.
h.
Network name (SSID): dell_device
Network Authentication: Open
Data encryption: Disabled
Ad hoc network: Checked
Click the Move up button to move the newly added SSID to the top of the list.
i.
Click OK to close the Property dialog box.
j.
NOTE:
When your OS is earlier than Windows 2000, create settings according to the manual of the
wireless setting tool provided by your wireless device manufacturer.
Check the IP, subnet mask and gateway address on your computer.
3.
e.g. IP: 192.168.1.1
Subnet mask: 255.255.0.0
Set the IP address from the printer control panel to be in the same range as that of your computer.
Match the subnet mask and gateway addresses of the printer to your computer settings.
Press
Menu
button.
a.
Scroll to
Admin
menu.
b.
Select
Wireless Net
.
c.
Select
TCP/IP
.
d.
Select
Get IP Address
.
e.
Select
Panel
.
f.
Scroll back to
IP Address
.
g.
Manually enter the IP address using the directional buttons on the control panel and press enter
button.
h.
4.
e.g.: 192.168.1.2
Scroll back to
Subnet Mask
.
i.
Manually enter the subnet mask address using the directional buttons on the control panel and
press enter button.
j.
Scroll back to
Gateway Address
.
k.
Manually enter the gateway address using the directional buttons on the control panel and press
the Enter button.
l.
Restart the printer.
m.
5.
Содержание 3110 Color Laser
