Dell 3110 Color Laser, Руководство пользователя

Страница: 95 / 451

Select Network Connections from Control Panel. a.
Right-click Wireless Network Connection and select Properties . b.
Select the Wireless Networks tab. c.
Make sure the check box for Use Windows to configure my wireless network settings is
checked.
d.
NOTE: Be sure to write down the current wireless computer settings in steps d and f so that you
can restore them later.
Click the Advanced button. e.
Select Computer to Computer (ad hoc) networks only and close the Advanced dialog box. f.
Click the Add button to display Wireless network properties. g.
Under the Association tab, enter the following information and click OK . h.
Network name (SSID): dell_device
Network Authentication: Open
Data encryption: Disabled
Ad hoc network: checked
Click the Move up button to move the newly added SSID to the top of the list. i.
Click OK to close the Property dialog box. j.
On the Enter Wireless Network Settings screen, set each wireless setting item, and then click
Next .
6.
When you select the Fixed IP option button for IP address assignment, click Settings... and enter the
IP address and subnet mask on the screen.
7.
NOTE: When you enter a fixed IP address, avoid the "169.254. xxx.xxx " address used by AutoIP.
Set each item on the Enter Printer Settings screen, and then click Next . 8.
On the Printer Software screen, specify the software that you want to install and installation path,
and then click Next . At this point, the wireless setting specified on the Enter Wireless Network
Settings screen is sent to the printer.
9.
On the Wireless configuration is now complete screen, change the wireless setting of your
computer to the same as that sent to the printer, and then click Next .
10.
a.