DATREND Systems vPad-TI, Руководство по эксплуатации

Страница: 57 / 86

vPad-TI OPERATING MANUAL
When the
WT
has been determined, the option will be provided to end the test or allow the
temperature data collection/graphing to continue, as per Figure 55. At this point the options are:
OK end the test now, or Continue Test .
If the test is allowed to continue after the initial determination of WT , then the data will be analyzed
for the
STC
, and green dotted lines will be displayed during the first 60 minutes that the data meets
the defined variability condition for
STC
, but has not reached the 60 minute criteria. In the
temperature graph, the warm up time is indicated by the blue circle around the data point, which in
this case is also the start of
STC .
Figure 54
Figure 55 : Continue Warm Up Test
Running a Test/Chapter 5
#
Page 45