dallmeier DLS 24 S1, Руководство по установке и настройке

Страница: 68 / 215

68 Dallmeier electronic GmbH & Co.KG
Digital HD Recorders DMS/DLS
Alarm recording interval
In contrast to the recording interval normal, a different recording
rate is often desired with alarm. The time set here only affects the
recording rate during alarm recording when an alarm is triggered.
IMPORTANT
Accident Prevention Regulation for Banks -
system parameter Bank!
To comply with the specifications of the Accident
Prevention Regulations for Banks, the Recording
interval normal may not be longer than 1 second.
The Recording interval alarm may not be longer
than 0.5 seconds.
Pre-alarm recording interval
The value in the Pre-alarm recording interval field determines the
recording rate for the set Pre-alarm image count.
¾
Check the checkbox next to same to transfer the Alarm
Recording Interval settings.
8.2.7 Resolution – Normal/Resolution – Alarm
The resolution of the recording is determined by the setting in the
Tracks dialog. Here, you can determine whether recording is to
occur in frame or field mode for each track.
See the Track settings chapter for this.
8.2.8 Pre-alarm picture count
In this field, you can enter the number of pictures to be recorded in
a separate ring memory. This pre-alarm ring is saved when recording
is triggered in recording modes Motion Detection and Contact.
Recording is then continued in accordance with the configuration.