dallmeier DLS 24 S1, Руководство по установке и настройке

Страница: 50 / 215

50 Dallmeier electronic GmbH & Co.KG
Digital HD Recorders DMS/DLS
Function display of the radio clock module
LED only illuminates green or only flashes red
= no reception.
LED only illuminates red, i.e. does not flash
= DCF 77 is connected to the wrong COM interface, or the
"RadioClock" function is not set.
LED flashes regularly back and forth between red/green
= Reception OK.
Notes on time synchronization
Please ensure that the time is not corrected right away after some
time has passed, as is done with conventional radio clocks. The
time in the DMS/DLS continuously approaches the correct time
until the DMS/DLS time is in sync with the radio signal. This process
can last several minutes.
The duration depends on the deviation between the set time and
the radio time.
This procedure is a result of the time-dependent, internal program
sequences of the DMS/DLS. Changing the time quickly can cause
an error in the sequence and thus a malfunction of the DMS/DLS.
Possible problems and causes with date and time
Incorrect time is displayed:
Check the time zone setting.
Time cannot be set manually:
The function for a serial interface is set to RadioClock.
Automatic switching from daylight-saving time to winter time does
not occur:
The time will only be switched over automatically when a
corresponding MET time zone is selected, e.g. Europe/Berlin.
Time is not set automatically despite good reception by the
DCF 77:
The deviation of the set time from the actual time is too
large. In this case, set the time manually first. The set time
may not deviate more than 1 000 seconds from the actual
time. Then activate the radio clock module.