dallmeier DLS 24 S1, Руководство по установке и настройке

Страница: 151 / 215

151 Dallmeier electronic GmbH & Co.KG
The camera contacts can be preset using Start recording camera
(recording mode Contact). Therefore the recording of the rele-
vant camera is started if the required recording settings have also
been made.Make the required recording settings under Setup >
Recording > Cameras (see also the chapter entitled Recording
Settings).
If you do not wish to record a camera using the Contact recording
mode, the function can be changed in the same way as the global
contacts (see below).
17.2.2 Leading and trailling edge
First of all only the configuration of the so-called leading edge of
the contact inputs will be displayed (Function n.o.). The functions
that are executed when the contact switches (normally when it
closes) are defined here.
In addition, however, functions can also be defined that are executed
when the contact is released (normally when it is opened).
The configuration of the functions for the trailing edge is displayed
when the show Function n.c. checkbox is checked.
These functions are set in exactly the same way as the functions
for the leading edge (see below).
Fig. 17-6: Activation of trailling edge