Convotherm 4 Table-Top, Руководство по эксплуатации

Страница: 140 / 144

Removing the halogen lamp
1.
Remove the four oven light hex screws using the socket
wrench.
Due to its design, the assembly consisting of the screws,
bezel, glass pane, seal, and bracket will remain together
when the screws are unscrewed.
2.
Remove the entire assembly from the oven wall .
3.
Reach into the reflector housing through the opening on
the oven wall and pull out the halogen lamp upwards in a
straight line.
Installing the halogen lamp
1.
■
Follow the same steps used to remove the halogen
lamp, but in opposite order.
When doing so, tighten the screws without applying too
much force so that the reflector housing will be sealed
against moisture (the glass may jump out from its place
if you tighten the screws too tightly).
■
Once you are done, remove all objects from the oven
cavity. Then rinse or wipe the oven cavity clean.
6 How to Perform Maintenance on the Combi Steamer
Operating Manual 140