Convotherm 4 Table-Top, Руководство по эксплуатации

Страница: 100 / 144

5.
Add cleaning agent from the single-measure dispensing
bottles to the inside of the oven cavity.
If necessary, remove the mobile shelf rack / plate rack
from the oven cavity to do so and then slide the shelf rack
back in.
6.
Close the unit door.
7.
Wait for the cleaning phase to be done (approx. 30 – 60
minutes depending on the selected cleaning profile).
If you are using easyTouch controls and you select the
'Express' cleaning duration, skip steps 8 through 12.
8.
■
Once the cleaning phase is done, the unit will make an
acoustic signal to let you know.
■
You will be prompted to add rinse aid to the inside.
■
The software will indicate how many single-measure
dispensing bottles are needed.
In exceptional cases, you can skip adding rinse aid de‐
pending on the water hardness and the degree of scale
build-up in the unit.
9.
Open the unit door.
10.
Add rinse aid from the single-measure dispensing bottles
to the inside of the oven cavity.
If necessary, remove the mobile shelf rack / plate rack
from the oven cavity to do so and then slide the shelf rack
back in.
11.
Close the unit door.
12.
Wait for the last cleaning phase to be done (approx. 20 –
30 minutes depending on the selected cleaning profile).
13.
■
Once the last cleaning phase is done, the unit will make
an acoustic signal to let you know.
■
Follow the software's prompts.
14.
■
Open the unit door and check to make sure that every‐
thing has been cleaned properly. The oven cavity
should be visibly clean and should not give off any
smells typical of food leftovers or cleaning agents.
■
Check the oven cavity to make sure that no foreign ob‐
jects got in during rinsing. If there are any foreign ob‐
jects, remove them.
■
If additional cleaning is required, clean and rinse the
oven cavity manually or by running a cleaning profile
once again.
15.
Leave the unit door ajar in order to let the oven cavity dry
out.
5 How to Clean the Combi Steamer
Operating Manual 100