Convotherm 4 Table-Top, Руководство по эксплуатации

Страница: 35 / 144

Safety hazard: moving units on bases with casters
Risk / hazard Where and in which situations will
the risk/hazard exist?
What to do
All the risks and haz‐
ards listed below
When units are being moved on a
base with casters
■
Before moving the unit (to clean
the combi steamer's case or the
floor, for example), check to make
sure that the retaining element de‐
signed to limit how much the base
can move with the unit is attached.
■
De-energize the unit before mov‐
ing it
■
When moving the unit, make sure
not to roll over any connection
lines (electrical, gas, and water)
Pinch point hazard (for
multiple body parts)
When units are being moved on a
base with casters
■
Pay attention to the utility and
hose connections.
■
Use at least two people to move
the unit
Pinch point hazard
(hand and foot hazard)
When units are being moved on a
base with casters
Keep the unit doors shut
Risk of scalding posed
by hot wastewater
When units are being moved on a
base with casters
■
Let the units cool down
■
Immediately wipe or mop up any
water that has leaked
■
Wear appropriate protective cloth‐
ing
Risk of scalding posed
by hot, liquid food
When units are being moved on a
base with casters
Do not move units if there is any
food still in them
Risk of electric shock
posed by live parts
When units are being moved on a
base with casters
Pay attention to the utility and hose
connections.
Gas explosion hazard When units are being moved on a
base with casters
Pay attention to the gas supply line
Skin and eye irritation
hazard as a result of
contact with cleaning
agents
When units are being moved on a
base with casters
■
Make sure that the connections
are long enough
■
When moving the base, keep the
cleaning agent canisters closed
Trip hazard as a result
of utility and hose con‐
nections routed in the
open
When cleaning behind units that
have been pulled forward
Exercise caution when performing
maintenance work
Fall hazard as a result
of floors being wet with
wastewater
■
When cleaning behind units that
have been pulled forward
■
In front of the unit
■
Immediately wipe or mop up any
water that has leaked
■
Make sure that the connections
are long enough
Fall hazard as a result
of floors being wet with
cleaning agents
■
When cleaning behind units that
have been pulled forward
■
In front of the unit
When moving the units, keep the
cleaning agent canisters closed
3 For Your Safety
Operating Manual 35