Convotherm 4 Table-Top, Руководство по эксплуатации

Страница: 99 / 144

5.2.3 How to Fully Automatically Clean the Oven Cavity Using the Single-
Measure Dispensing Mode
For your safety when cleaning
Before starting any cleaning work, familiarize yourself with the rules, risks, and hazards specified in
'Working Safely When Cleaning' on page 94 and follow all the corresponding instructions without ex‐
ception.
Procedures that you must be familiar with
You will need to be familiar with the following steps:
■
Safely Opening and Closing the Unit Door 60
■
Using the Transport Trolley to Put Food Inside the Oven and Take It Out (Does Not Apply to
ConvoSmoke) 71
■
Adding Cleaning Agent from Single-Measure Dispensing Bottles to the Inside of the Oven Cavity
119
Prerequisites
■
You must be familiar with how to use the software to such an extent that you will be able to access
and start the various cleaning profiles, please refer to the combi steamer's operating instructions.
■
All food must have been taken out from the oven cavity. There must not be any foreign objects in‐
side the oven cavity.
■
All bakeware, sheet pans, and shelf grills, as well as any other accessories, must have been taken
out from the oven cavity.
■
The oven drain must be clear. It must not be clogged or blocked by any residues. The strainer on
the oven drain must be in place.
■
The unit door's inner glass door must be properly locked in place.
■
The suction panel is properly locked in place.
■
The unit door must be closed.
■
You must supply the fluids required by the cleaning program you will be using. Please refer to 'Sup‐
plying Cleaning Agents' on page 93.
■
In the case of units with a mobile shelf rack / plate rack (does not apply to ConvoSmoke): The roll-
in frame must be in place and the empty mobile shelf rack / plate rack must be inside the oven
cavity.
How to Fully Automatically Clean the Oven Cavity Using the Single-Measure Dispensing Mode
1.
Open the cleaning profile and start the cleaning se‐
quence.
2.
Wait for the soaking phase to be done (approx. 5 – 10 mi‐
nutes depending on the selected cleaning profile).
3.
■
Once the soaking phase is done, the unit will make an
acoustic signal to let you know.
■
You will be prompted to add cleaning agent to the in‐
side.
■
The software will indicate how many single-measure
dispensing bottles are needed.
4.
Open the unit door.
5 How to Clean the Combi Steamer
Operating Manual 99