Collamat Etiprint Inline, Руководство по эксплуатации

Страница: 45 / 188

Etiprint Inline
Maintenance
45
8.2 Maintenance plan
The maintenance work required for ensuring optimum and fault-
free operation is described in the following sections. The
maintenance intervals are to be adhered to.
Where increased wear is established through regular checks on
components or assemblies, the operating company is to shorten
the maintenance intervals in line with the actual signs of wear.
Alterations to normal operation (higher power input, temperatures,
vibration, noises etc) can be assumed to impair the functions. To
avoid malfunctions which can bring about direct or indirect injury or
damage to persons and property, the maintenance personnel
responsible must be notified without delay.
With queries on maintenance work and intervals:
contact the manufacturer (see Service address page 2).
In addition to these Operating Instructions, the operating
instructions for the built-in components to be found in the Appendix
also apply. The information contained therein – in particular the
safety instructions – must be observed without fail!
Interval Maintenance work To be carried out by
Clean off dirt, dust and glue residue from the draw unit
roller, pressure roller and press-on roller (see section
8.3)
Check moving parts for free-running
Daily
Visual control of the equipment for condition and
damage
Operator
Clean contamination from the entire equipment Operator Monthly
Inspect condition and fault-free functioning of cables,
switches and safety equipment.
Electrician
Half yearly Check all fixing screws for tightness and re-tighten
where necessary. Adhere to the torque settings!
Operator
In accordance with
the printer operating
instructions Service printer in accordance with the printer operating
instructions (see appendix for printer operating
instructions).
Operator