Collamat Etiprint Inline, Руководство по эксплуатации

Страница: 162 / 188

Figure 24: Floating outputs
The following outputs are floating:
RUN Relais output indicates RUN mode
NOK Relais output indicates a WARNING message
ERROR Relais output indicates an ERROR message
IFEED Photocoupler, isolated FEED-signal
7.3.2 Open-Collector outputs
The Open-Collector signals are used to switch and control external units. Figure 25 shows the
electrical diagram of these outputs. The outputs are equipped with an internal free wheeling di-
ode. If an inductive load is switched an additional external diode is necessary.
Figure 25: Open-Collector output
The following Open-Collector outputs are available:
FEED Indicates that the traction motor is turning
CLOCK Steppermotor clock for synchronizing external units
NSTPO Nonstop control signal
47n 100E
47n 100E
Relais
R
A
C
SFH6156-3
Z39V
10E
+
-
1n 1n
Umax.: 24VDC
Imax: 25 mA
Umax: 250VAC
Imax: 1A
ULN2003
+24V
10E
1n
OUT
IN
+24V
+24V
R
L
Monitor
Umax: 24VDC
Imax: 100mA
5999.545-01G 28.02.2006 WM
Page 32 / 65