Collamat Etiprint Inline, Руководство по эксплуатации

Страница: 110 / 188

5.7 Speed and type of measurement
The Speed function is used to select the type of speed measurement and to adjust the method
of measuring. Three types of measurements are available:
Fixed speed
Incremental Encoder
Measuring Scanner
5.7.1 Fixed speed
At fixed speed the goods are labeled with a constant labeling speed. This speed is also used
when dispensing a label with the
Label jog function of the Labeling Mode menu.
SPEED DISPENSING SPEED
Method of measuring
Choice: Fixed Value : 20.0 m/Min
Dispensing Speed
User level: programmer/operator
Operating Mode: RUN/STOP
5.7.2 Inkremental encoder and measuring light barrier
When measuring the speed with an incremental encoder or by a measuring light barrier, the
speed of the goods is measured and they are labelled with this speed:
SPEED INCREMENTAL ENCODER
Method of measuring
Choice: Distance between
Incremental encoder two Pulses : 1.00 mm
SPEED DISTANCE BETWEEN
Method of measuring the Lightbeams
Choice: Measuring
Scanner Value : 14.0 mm
User level: programmer
Operating Mode: STOP
Note:
The distance of 14 mm applies for the standard light barrier of Collamat Stralfors
AG.
For more informations about the calculation of the speed measuring, refer to the
technical handbook Collamat 8600 and 9100
5999.530-01F 07.04.2006 WM

23