Collamat Etiprint Inline, Руководство по эксплуатации

Страница: 47 / 188

Etiprint Inline
Malfunctions, repair and maintenance work
47
9 Malfunctions, repair and maintenance work
This section describes possible causes of malfunctions and their
rectification.
Should, as a consequence of over-average intensive use the same
malfunctions repeatedly occur, the maintenance intervals must be
shortened commensurate with the actual workload.
In the case of malfunctions which cannot be rectified with the help
of the following information, contact the manufacturer ( S. 2)!
9.1 Safety
Fundamentals
WARNING!
Injury hazard from improper fault rectification!
Inexpert fault rectification can lead to serious
personal injury or damage to property.
Therefore:
– All work on fault rectification may only be
carried out by adequately qualified and
instructed personnel.
– Ensure ample working space prior to
commencing the work.
– Have regard for order and cleanliness at the
installation site! Loose parts and tools lying
around or on top of each other are a source of
accidents.
– If components have to be replaced:
Note correct fitting of spare parts.
Refit all fixing elements properly.
Adhere to torque settings for screws.
– Before switching on again, make sure that all
covers and safety devices are correctly installed
and function flawlessly.
Pneumatics
WARNING!
Injury hazard from compressed air!
Compressed air present in the pneumatic plant can
escape unexpectedly or set pneumatically driven
components in motion and cause serious injuries.
Therefore, before commencing any work:
– Switch off the pneumatic plant and secure
against re-starting.
– All pressure carrying components are to be
rendered pressure-free.