Collamat Etiprint Inline, Руководство по эксплуатации

Страница: 18 / 188

Etiprint Inline
Safety
18
2.8 Securing against re-starting
Fig. 1: Main switch "0” and secure
Securing main switch
If a main switch is installed within the safety chain, this can be
secured in position "0" with a padlock against re-starting.
DANGER!
Deadly danger from disallowed re-starting!
When the main switch has been secured with a
padlock, there could be persons present in the
danger zone. Switching on could fatally injure these
persons.
Therefore:
– Never remove the lock without authority.
– Before removing the lock, ensure that there are
no persons present in the danger zone.
Switch secured with lock
on the: .. at hrs.
DO NOT SWITCH ON
The lock may only be removed
by:
after it has been ensured that no
persons are present in the danger
zone.
Fig. 2: safety notice 1
Securing against re-starting:
1. Switch off power supply.
2. Where possible, secure the switch with a lock and affix a
clearly visible notice on the switch as per Fig. 1.
3. The key is to be kept by the member of staff named on the
safety notice.
Switched off
on the: .. at hrs.
DO NOT SWITCH ON
Switch-on may only be implemented
by:
after it has been ensured that no
persons are present in the danger
zone.
Fig. 3: safety notice 2
4. If it is not possible to secure a switch with a lock, display a
notice as per Fig. 2.
5. After all work has been performed, ensure that no persons are
still present in the danger zone.
6. Ensure that all safety equipment is installed and fully
functional.
7. Only now may the notice be removed.