Collamat Etiprint Inline, Руководство по эксплуатации

Страница: 13 / 188

Etiprint Inline
Safety
13
2.5 Work safety and special hazards
In the following section, residual risks are stated which are the
result of hazard analysis.
Observe the safety notices listed here and the warning signs in the
following sections of these instructions in order to reduce health
hazards and avoid dangerous situations.
Danger symbols on the equipment
The respective hazardous zones on the machine are identified by
these symbols:
DANGER!
Deadly danger from electrical current!
identifies potentially fatal situations due to
electrical current. Failure to observe the safety
sign can result in death or serious injury.
The work to be carried out may only be
performed by a qualified electrician.
WARNING!
Danger of crushing!
During operation, moving parts and objects can
cause crushing resulting in extremely serious
injuries and permanent bodily harm.
Therefore:
– Do not enter the hazardous area during
operation.
– Always perform setting up, maintenance work
and fault rectification with particular caution and
attention to crushing zones.
– Wear personal safety gear during all work to
protect against crushing.