Collamat Etiprint Inline, Руководство по эксплуатации

Страница: 113 / 188

5.10.3 Delayed Predispensing
In the Delayed Predispensing mode the predispensing 1 will only be tripped after release of the
label scanner. Thus the following label will not be sticked on the good being still under the
adapter.
After having selected the
Delayed Predispensing mode, the stop value 2 has to be entered so
that the label is perfectly dispensed and the following label does not contact. This value should
not exceed the label length. It can be smaller or greater than the predispensing. Under
'Stop at'
specify after which length labelling should be stopped and passing of the goods should be waited
for.
LABELLING MODE DELAYED PREDISPENS.
Choice : Delayed Pre Stop at 25 mm
User level: programmer
Operating mode: STOP
Course:
The dispensing process is started after the positioning delay and the goods have passed the
goods scanner. In the first phase the label will be pulled forward as specified for the value
'Stop
at' . When the good leaves the goods scanner, dispensing will be continued to the next positioning
delay with a fixed speed until predispensing.
2
1
5999.530-01F 07.04.2006 WM

26