Collamat Etiprint Inline, Руководство по эксплуатации

Страница: 27 / 188

Etiprint Inline
Transport, packaging and storage
27
5.5 Packaging
Packaging The individual packages are packed appropriately for the
anticipated transport conditions. Only environmentally friendly
materials are used for the packaging.
The packaging should protect the individual components against
transport damage, corrosion etc. until installation. Therefore don’t
destroy the packaging and only remove it shortly before installing.
Dealing with the packaging material If there has been no agreement made to return the packaging,
separate the materials according to type and size and use them
again or recycle them.
CAUTION!
Environmental damage due to improper
disposal!
Packing materials are valuable raw materials and
in many cases can be used again or sensibly
prepared and recycled.
Therefore:
– Dispose of the packaging material in an
environment friendly manner.
– Observe the locally applicable disposal
regulations. If necessary, assign the disposal to
a specialist company.
5.6 Storage
Storing the packages
Store the packages in the following conditions:
Do not store in the open.
Store in a dry and dust free place.
Do not expose to aggressive media.
Protect from direct sunlight.
Prevent mechanical shocks.
Storage temperature: -10 to +60 °C
Relative humidity: max. 95%, non-condensed.
If storing for longer then 3 months, check the general
condition of all parts and the packaging regularly If
necessary, refresh or renew the mothballing agents.
NOTE!
Under certain circumstances, information on
storage which go beyond the requirements stated
here is to be found on the packages. These are to
be complied with accordingly.