Collamat Etiprint Inline, Руководство по эксплуатации

Страница: 67 / 188

CE – Declaration of incorporation
The manufacturer: Collamat AG
Bodenmattstrasse 34
CH-4153 Reinach – Switzerland
declares, that the machinery / machinery component named below as:
Series:
Etiprint Inline I50
Serial number: from 0068
Year of manufacture: from 2010
is intended to be assembled with other machinery / machinery components to constitute machinery, witch shall
not be put into service until the assembled machinery has been declared in conformity with the provisions of the
EC Council Directive on Machinery
2006/42/EG (including there changes and extensions):
Appendix I: article: 1.1.2, 1.1.3, 1.1.5, 1.3.2, 1.3.4 and 1.5.1.
The above mentioned machinery relates furthermore to the regulations and directives of:
2006/95/EG (low voltage directive) and 2004/108/EG (electromagnetic compatibility directive
–
EMC).
Applied harmonized standards, in particular are:
EN ISO 12100-1
Safety of machinery
–
Basic concepts, general principles for design – Part 1:
Basic terminology, methodology
EN ISO 12100-2 Safety of machinery
–
Basic concepts, general principles for design – Part 2:
Technical principles
EN ISO 60204-1 Safety of Machinery
–
Electrical Equipment of Machines – Part 1: General
Requirements-IEC 60204-1: 1997;
EN ISO14121-1 Safety of machinery
–
Risk assessment principles
A technical documentation set of this piece of machinery is available on demand - in electronic form (for
governmental use only). The corresponding documentation to this piece of machinery has been issued
according to appendix VII part B.
Responsible person for the composition of all technical documents according to Appendix VII – chapter B of
the Directive on Machinery 2006/42/EG is:
Collamat AG, Paul Schneider, Bodenmattstrasse 34, CH-4153 Reinach, Switzerland
Issued in Reinach: 01. September 2011 by:
Collamat AG – Bodenmattstrasse 34, CH-4153 Reinach, Switzerland
Authorized persons:
CEO – Frank Ankersen