Collamat Etiprint Inline, Руководство по эксплуатации

Страница: 54 / 188

Etiprint Inline
Malfunctions, repair and maintenance work
54
9.4.4 Changing the pressure roller
The pressure roller is a wear part which, depending on load and
handling can become less or more quickly worn out. With
labelling, it should be noted that the backing paper runs between
the pressure roller and the draw unit roller. If the backing paper is
wider than the pressure roller, this should sit centrally on the
backing paper.
Procedure:
Remove the cover on the reverse side.
Carefully undo the front plate (6) and remove it.
Loosen rotary knob (7) and pull it off.
On the reverse side, undo the lugged axle (5) and remove it
to the front.
Undo the screw (2) on the pressure roller (3) and pull the
pressure roller forward from the pinch roller axle (1).
Push the new pressure roller onto the pressure axle and fit.
Fig. 15: Changing the pressure roller
1 Pinch axle
2 Screw
3 Pressure roller
4 Draw unit roller
5 Lugged axle
6 Front plate
7 Rotary knob