Club Car 2007 XRT 800, Руководство по техническому обслуживанию, Страница: 347 / 516

UNITIZED TRANSAXLE: 850 GASOLINE VEHICLE Forward/Reverse Shifter Cable
2007-2008 XRT 800, 810 and 850 Maintenance and Service Manual Page 19-21
19
FORWARD/REVERSE SHIFTER CABLE ADJUSTMENT
With the shifter lever of the unitized transaxle in the NEUTRAL position (Figure 19-53, Page 19-21) , the For-
ward/Reverse handle (9) (Figure 19-52, Page 19-20) should align with the N position on the dash. For minor
adjustments, the nut (10) may be loosened and the ball joint socket (4) rotated to get the proper adjustment
(Figure 19-52, Page 19-20) . See following CAUTION.
ý
CAUTION
• Be sure threads of cable are engaged in ball joint socket at least 1/4 inch (6.35 mm). If ball
joint socket comes loose from the cable, the Forward/Reverse shifter will not operate
properly.
For major adjustments, the cable jacket retaining nuts (6) must be loosened and adjusted. When the cable is
properly adjusted, with the Forward/Reverse handle (9)
(Figure 19-52, Page 19-20) in the NEUTRAL posi-
tion, the shifter arm of the transaxle will also be in the NEUTRAL position (Figure 19-53, Page 19-21) .
Tighten nuts at the transaxle to 22 ft-lb (29.8 N·m).
Figure 19-53 Forward/Reverse Shifter Positions
F
N
R