Troubleshooting
-90-
6
Area
Malfunction
Possible Cause
Corrective Measure
Ref.
Brake
Parking brake does not
work well, or machine
pulls to one side when
braked.
Brake is not proerly
adjusted.
→Adjust.
Page 70
Brake is wet with water.
→Apply brake a few
times to dry.
Other (other than the
above).
→Please contact
your CANYCOM
representative.
Chassis
Machine vibrates
abnormally.
Improperly inflated tires. →Adjust tire pressure.
Page 63
Other (other than the
above).
→Please contact
your CANYCOM
representative.
Electrical
System
Head light does not
illuminate properly.
Blown bulb.
→Replace bulb.
Page 81
Blown fuse.
→Replace fuse.
Page 80
Other (other than the
above).
→Please contact
your CANYCOM
representative.
Cutting
System
Mower does not run
Mower drive belt is
severed.
→Replace.
Mower does not stop
Mower brake lining is
worn.
→Replace.
Mower drive belt slips.
Belt is loose.
→Adjust belt tension.
Page 74
Belt is worn.
→Replace.
Page 74
Cut grass or vines
accumulate in the mower.
→Clean.
Page 82
Abnormal vibration
occurs when cutting
blade is rotated..
Cutting blade is damaged
or lost.
→Replace cutting
blades.
Page 71
Foreign object is caught
by cutting blade.
→Remove or clean
foreign object.
Other (other than the
above).
→Please contact
your CANYCOM
representative.
Cut grass is not
discharged properly.
Grass is wet.
→
Cut when grass is dry.
Grass is too long.
→Cut in several steps at
different heights.
Cutting height is too low.
→Raise cutting height.
Engine speed is too low.
→Raise engine speed.
Driving speed is too high.
→Drive slow.
