CanyCom CMX 227 Скачать руководство пользователя

Страница: 41 / 103

-33-

Operation

• Do not make a sudden stop. Operator may be thrown off, or the machine may

skid or tip over.

• Always park on a firm, level place. Never park on a potentially dangerous place.

• Do not park near combustibles.

Stopping

1. Gradually return the drive pedal to slow

down.

2. Take the foot off the drive pedal.

When Driving with Drive Pedal

• The drive pedal returns automatically to the

neutral when released.

NOTE

5347M-0402-040E

Drive Lever

Neutral Position

1. Gradually return the drive lever to the neutral

position to slow down.

2. Release the hand off the drive lever.

When Driving with Drive Lever

• Do not hold the drive lever and depress the parking brake pedal at the same

time. Or, do not depress the drive and parking brake pedals at the same time.
The HST may be damaged.

5347M-0402-160E

Drive Pedal

Содержание CMX 227








































































































Результаты поиска

Содержание CMX 227

Отзывы:

Похожие инструкции для CMX 227

Бренды по названию

Популярные бренды

CanyCom CMX 227, Руководство оператора

Результаты поиска

Содержание CMX 227

Отзывы:

Похожие инструкции для CMX 227

Бренды по названию

Популярные бренды