-93-
Transporting
7
Hoisting
1. Raise the seat.
2. Attach hoisting slings to the 2 lift hooks and
hoist the machine.
• License or certification is required to operate a crane. Check your local
regulations.
• Use hoisting sling of sufficient strength. Always use the slings of the same
length when more than one is used.
• Pay special attention to the center of gravity and the balance of the machine
when hoisting.
• Always stop the engine before hoisting. Never start the engine when hoisted.
3. Set cutting height adjust lever to [150] for CMX227, CM226. Shift auxiliary transmission
shift lever to [L] (low speed) and drive machine slowly forward onto the bed. Pay
attention not to hit the loading lamp or the bed when loading on a transporter.
4. Park machine according to the instructions in
"Parking"
(Page 37). Tie the machine
with rope or tie-down belts and secure it onto the bed of the transporter securely.
5332M-0702-010E
Hooks
• When hoisting the machine, never go under the machine. The machine can fall,
resulting in death or injury.
