Canon Colorado M Series, Руководство по эксплуатации

Страница: 297 / 378

Field Description
jobtype The value AP (Automatic Print Jobs) is used for all jobs from the RIP, so the value
is always AP.
jobname The name of the job specified in the RIP.
printmode The name of the print mode that was used in the job.
startdate <yyyy><mm><dd> The date the printer starts printing the job.
starttime <hh>:<min>:<ss> The time the printer starts printing the job.
activetime <num>:<min>:<ss> The total time the job is active and printing. This time in-
cludes autonomous maintenance actions. Note that the time needed for warming
up before the printer is ready and the time spend waiting for the operator, e.g. to
solve an error, is not included. Time in hours, minutes, seconds, where hours can
exceed 24.
idletime <num>:<min>:<ss> The total time an active job is waiting for operator interac-
tion, e.g. solving an error or loading media. Time in hours, minutes, seconds,
where hours can exceed 24.
readydate <yyyy><mm><dd> The date a job is completed successfully, canceled or deleted.
readytime <hh>:<min>:<ss> The time a job is completed successfully, canceled or deleted.
accountid This field is always empty.
noffinished-
sets <num> The number of times the bitmap, as received by the RIP, has been prin-
ted.
NOTE
This number can be lower than 'copiesrequested' as the user can can-
cel or delete a job.
result 'Done', 'Abrt', 'Stop', 'Deleted'. The state in which the job was completed.
• 'Done': when the job was completed successfully.
• 'Abrt': when the job was started, but aborted by the operator or controller due
to an error.
• 'Stop': when the job was started, but stopped or paused by the operator.
• 'Deleted': when the job was deleted before it was printed.
reception-
date <yyyy><mm><dd> The date the printer controller completely received the job
from the RIP.
reception-
time <hh>:<min>:<ss> The time the printer controller completely received the job
from the RIP.
operator-
note Note information specified in the RIP.
copies re-
quested <num> The number of copies requested by the RIP.
mediatypeid The media type ID specified in the RIP that is used to communicate to the printer
which media it has to use.
mediatype The name of the media type that is displayed on the operator panel.
mediawidth <num> in 0.1 mm (0.004 inch). The width of the media on which the job is prin-
ted.
4
Download an account log file
Chapter 9 - Troubleshooting and support 297