Camlab Lovibond MD 610, Инструкция по эксплуатации

Страница: 160 / 371

154
MD 610_2d 11/2019
Iron, total (Fe in Mo)
in the presenceof Molybdate
with Vario Powder Pack
0.01 – 1.80 mg/l Fe
1. Fill a clean Mixing Cylinder (50 ml) with 50 ml of the
water sample .
2. Add the contentsof one Vario (Fe in Mo) Rgt 1 Pow-
der Pack straight from the foil into the water sample
(50 ml).
3. Closethe Mixing Cylinder tightly with a stopper and
invert severaltimes to dissolve the powder.
4. Use two clean vials (24 mm Ø) and mark one as
blank for zeroing.
5. Add 10 ml of the prepared water sample to the
vial (this is the blank ).
6. Closethe blank tightly with the cap.
7. Fill a clean Mixing Cylinder (25 ml) with 25 ml of the
prepared water sample .
8. Add the contents of one Vario (Fe in Mo) Rgt 2
Powder Pack straight from the foil into the prepared
water sample (25 ml).
9. Close the Mixing Cylinder tightly with a stopper and
invert severaltimes to dissolve the powder (note 5).
10. Press [ ] key.
Wait for a reaction period of 3 minutes.
11. After the reaction period is finished proceed as follows:
Fill the second prepared vial (point 4) with 10 ml of
the sample .Thisis
the sample .
12. Place the blank in the sample chamber making sure
that the marks are aligned.
13. Press ZERO key.
1 2
3 4
2 4 2
prepare Zero
press ZERO
Count-Down 1
3:00
Start: