Camlab Lovibond MD 610, Инструкция по эксплуатации

Страница: 50 / 371

44
MD 610_2d 11/2019
Chloride
with Liquid Reagent
0.5 – 20 mg/l Cl
–
1. Fill a clean vial (24 mm Ø) with 10 ml of the water
sample , closetightly with the cap.
2. Placethe vial in the sample chamber making sure that
the
marks are aligned.
3. Press ZERO key.
4. Removethe vial from the sample chamber.
5. Fill the vial with drops of the same size by holding the
bottle vertically and squeezeslowly:
20 drops KS251 (Chloride Reagent A)
6. Close the vial tightly with the cap and invert several
times to mix the contents.
7. Fill the vial with drops of the same size by holding the
bottle vertically and squeezeslowly:
20 drops KS253 (Chloride Reagent B)
8. Close the vial tightly with the cap and invert several
times to mix the contents.
8. Placethe vial in the sample chamber making sure that
the
marks are aligned.
9. Press TEST key.
Wait for a reaction period of 5 minutes .
After the reaction period is finished the measurement
starts automatically.
The result is shown in the display in mg/l Chloride.
9 2
prepare Zero
press ZERO
Zero accepted
prepare Test
press TEST
Countdown
5:00