Camlab Lovibond MD 610, Инструкция по эксплуатации

Страница: 99 / 371

93
MD 610_2d 11/2019
Chromium, total (Cr(lll) + Cr(Vl))
with Powder Pack
0.2 – 2 mg/l Cr
Digestion:
1. Fill a clean vial (16 mm Ø) with 10 ml of water sample .
2. Add the contents of one PERSULF.RGTFORCRPow-
der Pack straight from the foil into the vial.
3. Closethe vial tightly with the cap and swirl severaltimes
to mix the contents.
4. Heat the vial for 120 minutes in a preheated thermo-
reactor at a temperature of 100°C .
5. Removethe vial from the thermoreactor.
(CAUTION: The vials are hot!).
Invert the vial and allow to cool to room temperature.
Performing test procedure:
Insert the adapter for 16 mm Ø vials.
6. Placethe pre prepared vial in the sample chamber mak-
ing sure that the marks
are aligned.
7. Press ZERO key.
8. Removethe vial from the sample chamber.
9. Add the contents of one CHROMIUM HEXAVALENT
Powder Pack straight from the foil to the water sample.
10. Closethe vial tightly with the cap and swirl severaltimes
to mix the contents.
11. Placethe vial in the sample chamber making sure that
the marks are aligned.
12. Press TEST key.
Wait for a reaction period of 5 minutes .
After the reaction period is finished the measurement
starts automatically.
The result is shown in the display in mg/l total Chro-
mium.
Ø 16 mm
prepare Zero
press ZERO
Zero accepted
prepare Test
press TEST
Countdown
5:00
1 2 5