Camlab Lovibond MD 610, Инструкция по эксплуатации

Страница: 165 / 371

159
MD 610_2d 11/2019
10. Press ZERO key.
11. Removethe vial from the sample chamber and empty
the vial.
12. Add 10 ml prepared water sample to the same
vial .
13. Fill the vial with drops of the same size by holding the
bottle vertically and squeezeslowly:
10 drops KS61 (Ferrozine/Thioglycolate)
14. Closethe vial tightly with the cap and swirl severaltimes
to mix the contents.
15. Placethe vial in the sample chamber making sure that
the marks are aligned.
16. Press TEST key.
Wait for a reaction period of 5 minutes (note 1,
page 157).
After the reaction period is finished the measurement
starts automatically.
Theresult is shown in the display in mg/l total iron or, if
a filtered sample was used, in mg/l total soluble iron.
prepare Zero
press ZERO
Countdown
5:00
Zero accepted
prepare Test
press TEST