Camlab Lovibond MD 610, Инструкция по эксплуатации

Страница: 242 / 371

236
MD 610_2d 11/2019
Polyphosphate HR
with Liquid reagent
5 – 80 mg/l PO
4
This test will give total inorganic phosphate.
Polyphosphatebeing determined by the difference of total
inorganic phosphate and ortho-Phosphate.
1. Fill a clean100-ml-Erlenmeyer flask with 50 ml homo-
genized sample.
2. Add 15 drops of KS278 (50% SulphuricAcid) to the
same water sample.
3. Boil for 20 minutes , maintaining the sample volume
above 25 ml with deionised water.
4. Swirl gently severaltimesto mix the contentsand allow
the Erlenmeyerflask to cool to room temperature.
5. Fill the Erlenmeyer flask with drops of the same size by
holding the bottle vertically and squeezeslowly:
2 dropsKS135 (Phenolphthalein Substitute Indicator)
6. Add drops of KS144 (Calcium Hardness Buffer) , one
drop at a time with mixing , until a pale pink colour
just appears.
7. Fill the sample up to 50ml with deionised water.
8. Proceedasin point 3 of the method before (page234).
The result is shown in the display in mg/l inorganic total
Phosphate (ortho-Phosphate or Polyphosphate).
3 5 3