Bull Cedoc NovaScale R440 E2 Скачать руководство пользователя страница 496

Страница: 496 / 552

E-2 Installing Windows Server 2003 X64 Editions

Service Pack Which EXPRESSBUILDER Supports

The ExpressBuilder DVD attached to the server supports following combination of the OS installation media and Service

Pack.

Windows Server 2003 R2 x64 Edition

–

OS installation media (with Service Pack 2)

–

OS installation media (No Service Pack) + Service Pack 2

–

OS installation media (No Service Pack)

Installing Service Pack

You can install the Service Pack on the server. When the Service Pack is not attached to your system, prepare it by yourself.

Updating System

If you modified the Windows system, execute "Update the system" in the Autorun Menu.

Re-installing to the Hard Disk Drive which has been upgraded to Dynamic Disk

If you want to leave the existing partition when installing the system on the hard disk drive upgraded to Dynamic Disk, note

the following issue:

Do not select the partition that OS had been installed as the partition to install the OS newly.

Select "Use the current File System" for the format of OS partition.

Mounting MO Device

Do not mount an MO device on your server during the Windows installation.

About Removable Media

Do not set removable media, such as DAT, into the device mounted on your server during the OS installation.

Floppy Disk Drive

The internal floppy disk drive is not included in your system at the standard configuration. Prepare the optional USB floppy

disk drive if necessary.

Содержание NovaScale R440 E2









































































































































































































































































































































































































































































































































































Результаты поиска

Содержание NovaScale R440 E2

Отзывы:

Bull Cedoc NovaScale R440 E2, Руководство пользователя, Страница: 496 / 552

Результаты поиска

Содержание NovaScale R440 E2

Отзывы: