Bull Cedoc NovaScale R440 E2 Скачать руководство пользователя страница 327

Страница: 327 / 552

Troubleshooting 8-19

Fail to access the hard disk drive:

(Refer to the documentation supplied with the RAID Controller.)

Is the hard disk drive applicable to the server?

→

Operation of any device that is not authorized by Bull is not guaranteed.

Is the hard disk drive properly installed?

→

Make sure to lock the hard disk drive with the lever on its handle. The hard disk drive is not connected to the

internal connector when it is not completely installed (see Chapter 9).

Fail to access the (internal or external) SCSI devices:

Is the SCSI device applicable to the server?

→

Operation of any SCSI device that is not authorized by Bull is not guaranteed.

Are SCSI devices properly configured?

→

When the server has external SCSI devices connected, hard disk drive settings, including SCSI ID and

terminator, are required. Refer to the manual that comes with the SCSI device for details.

Are the SCSI controllers (including optional controllers) properly configured?

→

Use the SCSI BIOS setup utility for proper configuration of SCSI devices connected to the SCSI connector

on the mother board. When the server has an optional SCSI controller installed and SCSI devices connected

to it, use the SCSI BIOS setup utility that comes with the optional SCSI controller for proper configuration.

See the manual that comes with the optional SCSI controller for details.

Содержание NovaScale R440 E2









































































































































































































































































































































































































































































































































































Результаты поиска

Содержание NovaScale R440 E2

Отзывы:

Похожие инструкции для NovaScale R440 E2

Бренды по названию

Популярные бренды

Bull Cedoc NovaScale R440 E2, Руководство пользователя

Результаты поиска

Содержание NovaScale R440 E2

Отзывы:

Похожие инструкции для NovaScale R440 E2

Бренды по названию

Популярные бренды