Bull Cedoc NovaScale R440 E2, Руководство пользователя

Страница: 104 / 552

4-10 Configuring Your Server
Peripheral Configuration
IMPORTANT:
Note that the interrupt and/or base I/O address are not overlapped with others. If
the value set for the interrupt or base I/O address is used in another resource, the yellow asterisk
(*) appears. Reset any item with the yellow asterisk properly.
Option Parameter Description Your Setting
Serial Port A Disabled
[Enabled] Selects whether serial port A is enabled or
disabled.
To use serial port A, an optional and
additional RS232C connector is required.
Base I/O
address [3F8]
2F8
3E8
2E8 Selects the base I/O address for serial port
A.
Interrupt IRQ 3
[IRQ 4]
Selects the interrupt for a serial port A.
Serial Port B Disabled
[Enabled] Selects whether serial port B is enabled or
disabled.
Base I/O
address 3F8
[2F8]
3E8
2E8 Selects the base I/O address for serial port
A.
Interrupt [IRQ 3]
IRQ 4
Selects the interrupt for a serial port A.
USB 2.0 Controller Disabled
[Enabled]
Selects whether the USB 2.0 controller is
enabled or disabled.
Serial ATA Disabled
[Enabled] Selects whether the serial ATA is enabled
or disabled.
SATA Controller
Mode Option Compatible
[Enhanced] Selects an operation mode of onboard
SATA controller. Displayed only when Serial
ATA is enabled.
Compatible mode:
SATA drives are automatically detected
and recognized as legacy mode.
Enhanced mode:
SATA drives are automatically detected
and recognized as native mode.
SATA AHCI Disabled
[Enabled] Selects whether AHCI (Advanced Host
Controller Interface) is enabled or disabled.
Displayed only when [Enhanced] is
selected for [SATA Controller Mode Option].
SATA RAID Disabled
[Enabled] When set to [Enabled], this menu appears
if RAID configuration jumper switch is set to
[RAID enable] position. See Chapter 4 for
details.
[ ]: Factory-set