S-7300A
8. REPLACING PARTS
149
10. Set the maximum meshing amount for the upper and
lower knives to 2 mm.
*
Turn the thread trimmer lever (1) to align the tip of the
upper knife (10) with the center of the index mark (14) on
the lower knife (6).
*
Make sure that the tip of the upper knife (10) does not go
past the index mark (14).
11. Tighten the screw (2) of the thread trimmer lever (1).
*
Make sure that there is no play in the thrust direction in
the forked shaft (15) of the thread trimmer lever (1) (see
illustration on page 9).
0956D
0957D
2mm
Содержание S-7300A
Страница 8: ...S 7300A vi Control box Oil tank Transformer box 100 V 400 V system only 0874D ...
Страница 9: ...S 7300A vii ...
Страница 107: ...S 7300A 6 ASSEMBLY 96 1094D 6 14 Stand 1 Stand L 2 Stands R 3 pcs ...
Страница 174: ...S 7300A 8 REPLACING PARTS 163 15 Install the top cover 1 16 Install the pulley cover 2 1029D 1030D ...