Brother S-7300A, Руководство по обслуживанию

Страница: 35 / 196

S-7300A
3. FUNCTION SETTINGS
24
List of check items
Panel display
Checking method
Item
No.
Check details
Input status
(Min. value - Max. value)
Judgment
IN-01
Treadle input value(Voltage display)
Depression status is also displayed
0.000
～
5.000V
Reversed: Around
1 V
Neutral: Around 2
V
Depressed:
Around 3.8 V
Depress the treadle.
IN-02
Upper shaft rotation angle
(0° at highest needle bar position)
0
～
359°
Positive in the
direction of the
arrow
Turn the pulley by hand.
IN-03
Encoder count of feed motor
(Position when power is turned on is
0)
－
999
～
999
Positive in the
clockwise rotation
direction
Move the feed link by
hand.
IN-04 Needle up signal status ON / OFF
ON within the
range of 25° to 75°
Turn the pulley by hand.
IN-05 Needle down signal status ON / OFF
ON within the
range of 195° to
245°
Turn the pulley by hand.
IN-06
Power incoming voltage
100 V: Display value ÷ 2 is the actual voltage
400 V: Display value × 2 is the actual voltage
***V
Within ±10% of
power supply
voltage
IN-07 Head safty switch ON / OFF
OFF when tilted
back
Tilt the panel.
IN-08 X-over seam thickeness sensor 0.00
～
9.99mm
Increases when
the presser foot is
raised
Raise and lower the
presser foot.
IN-09 Hand switch A
OFF
～
7
(OFF,1
～
7)
Changes within
the range given at
left
Press hand switch A.
IN-10 Hand switch B
OFF
～
2
(OFF,1,2
）
Changes within
the range given at
left
Press hand switch B.
IN-11
Knee switch or presser foot switch of
standing up pedal
ON / OFF ON when pressed
Press the knee switch or
the presser foot switch of
the standing operation
pedal.
IN-12 Speed input from standing up pedal
0.000
～
5.000V
* Around 0 V when
disconnected
---
Press the standing
operation pedal high
speed switch.
IN-13
High speed switch of standing up
pedal
ON / OFF ON when pressed
Press the corresponding
switch.
IN-14 Trimming switch of standing up pedal ON / OFF ON when pressed
Press the corresponding
switch.
IN-15
Slow speed switch of standing up
signal
ON / OFF
ON when pressed
Press the corresponding
switch.
IN-16 Menu key ON / OFF ON when pressed Press the menu key
IN-17 Home key ON / OFF ON when pressed Press the home key
IN-18 Half stitch key ON / OFF ON when pressed Press the half stitch key
IN-19 Main motor overheating sensor 0.000
～
3.300V
Drops when the
temperature rises.
IN-20 Feed motor overheating sensor 0.000
～
3.300V
Drops when the
temperature rises.
IN-21 Option input (IN1
）
ON / OFF
ON when input is
0 V
---
IN-22 Option input (IN2
）
ON / OFF
ON when input is
0 V
---
IN-23
Option input (IN3
）
ON / OFF
ON when input is
0 V
---