S-7300A
3. FUNCTION SETTINGS
6
3-3. List of memory switch settings
Presser foot lifter and treadle settings (001 to 099)
No. Setting range
Initial
value
Setting
units
Setting details
001
ON/OFF
(*1)
－
Presser foot operation when the treadle is returned to the neutral position
after thread trimming
ON: Presser foot is raised
OFF: Presser foot is not raised
(*) The presser foot is raised when MSW-851 is set to "OFF".
002
ON/OFF
OFF
－
Presser foot operation when sewing operation stops at the neutral treadle
position
ON: Presser foot is raised
OFF: Presser foot is not raised
003
ON/OFF
ON
－
Presser foot lifting after treadle is returned to neutral position to stop
sewing and is then depressed backward to the 1st step
ON : Enabled
OFF: Disabled
004
ON/OFF
ON
－
Thread trimming and end backtack sewing when the treadle is depressed
backward
ON: Thread trimming and end backtack sewing operations are enabled
(However, if thread trimming operation is locked, needle up operations
will be carried out without thread trimming.)
OFF: Thread trimming and end backtack sewing operations are disabled
(presser foot lifts when the treadle is depressed backward)
010
ON/OFF
OFF
－
Treadle operation after standing operation pedal is used
(Alternating operation is possible)
(*) For simultaneous operation which includes operation of the presser foot
lifter pedal, operation of the standing operation pedal takes priority.
ON: Treadle operation is still enabled after standing operation pedal has
been used (alternating operation is possible)
OFF: Treadle operation is disabled after standing operation pedal has been
used
011
0
～
1
0
1
Operation when standing up variable speed pedal is ON
0: Sewing speed corresponds to treadle depression amount
1: Sewing speed corresponds to sewing speed set for main sewing
(constant speed)
012
0
～
500
(ms)
80
(ms)
10
(ms)
Delay time from standing pedal turning on until motor starts operating
013
ON/OFF
ON
－
Operation when presser foot lifter pedal is ON and AUTO function is set to
ON
ON: Sewing is interrupted when presser foot lifter pedal turns on (pause
operation)
OFF: No operation
014
ON/OFF
ON
－
Operation when high-speed pedal is pressed slightly and AUTO function is
set to ON
ON: Motor operation switches on/off each time the high-speed pedal is
depressed slightly to ON and back to OFF
(*) This setting is disabled when MSW-010 is set to "ON".
OFF: Disabled (sewing machine motor does not stop)
015
ON/OFF
ON
－
Presser foot operation using thread trimming pedal after thread is trimmed
ON: Presser foot can be raised and lowered
(*) If MSW-051 is set to "ON", thread trimming pedal operation is disabled
after the presser foot lifter pedal has been operated during standing
operation.
OFF: No operation (only possible using presser foot lifter pedal)
(*1) For other than Europe and America
For Europe and America
Содержание S-7300A
Страница 8: ...S 7300A vi Control box Oil tank Transformer box 100 V 400 V system only 0874D ...
Страница 9: ...S 7300A vii ...
Страница 107: ...S 7300A 6 ASSEMBLY 96 1094D 6 14 Stand 1 Stand L 2 Stands R 3 pcs ...
Страница 174: ...S 7300A 8 REPLACING PARTS 163 15 Install the top cover 1 16 Install the pulley cover 2 1029D 1030D ...
