Brady POWERMark, Руководство пользователя

Страница: 61 / 201

Label Design
¡ 3-5
2) Type a number within the valid size range.
Note the following about type size:
•
The type size you can use depends on the width of the supply that’s currently installed.
For example, you won’t be able to select an 8-inch size if the supply is only 4 inches
wide.
•
If you’ve already typed text and you select a type size that would make the text not fit
on the installed supply, an error message displays.
•
Above certain type sizes for each supply width, the system will print the text in all
capital letters. If this occurs, you’ll see a “Caps only” message.
3)
Press Enter.
The Make Change window appears:
4)
Press the
↑
or
↓
key to highlight the option you want to use. Then press Enter.
A change marker representing the type size change appears in the text entry area ( ).
Make Change option What it does
At beginning of text Changes the type size for all text in the text buffer. However, if
you’ve already changed the size within the text, that size will
remain in effect; this change will apply only to the text
preceding the first type size change marker.
At cursor Changes the type size for all text starting at the current cursor
position.
Note: Repeat these steps when you want to change the type size again.
At beginning of text
At cursor
Make Change
Press
↑↓
, ENTER or ESCAPE