Brady POWERMark, Руководство пользователя

Страница: 104 / 201

5-2 ¡
Installing and removing memory cards
Installing and removing memory cards
Before you can save, retrieve or delete files from a memory card, you need to install the card in the
labeling system. There are two memory card slots located on the right side of the system (if you
are facing the display window).
You can insert the card you want to use in either slot. If there is no card in the top slot, the system
automatically checks the bottom slot. However, if there are cards in both slots, the system always
uses the card in the top slot. (If you want to erase a memory card as described in
Clearing a
memory card
on page 5-12, you must insert the card in the top slot.)
1) If you need to remove a memory card that’s already installed, push in the black button
above the slot to release the card, then pull the card out.
2) Slide the new card firmly into the slot as far as it will go.
When the card is properly installed, the black release button above the slot will pop out.
Note:
You don’t need to turn off the system before installing or removing a memory
card.
Memory card slots