BC Biomedical ESU-2400, Руководство пользователя, Страница: 94 / 190

82
Available Parameter Descriptions
ESU-2400 Model Only
Mode Parameter Abbreviation Description
P
u
lsed
a
n
d
Co
n
tin
u
o
u
s Mod
e
mV RMS mV
This is the mV measured directly from the RF current
transformer.
mA RMS mA
This is the converted mA measurement based on the RF
transformer mV to mA attenuation ratio.
Power in Watts Watts
This is the computed power based on load setting and mA
measured.
mV Peak mV Pk
This is the maximum mV measured in the buffer.
NOTE: This is shown as an absolute value.
mV Peak
– to –
Peak
mV P-P
This is the difference between maximum mV measured and
min mV measured.
mV Peak /
Peak
– to – Peak
Vp/P-P
This is the ratio of Peak divided by
Peak to Peak millivolts.
mV Positive Peak
Only
mV Pk+
This is the maximum positive mV measured in the buffer.
For asymmetric waveforms this can determine if the output
polarity is reversed.
Crest Factor CF This is the ratio of peak to rms of the measured waveform.
Frequency kHz This the frequency of the measured waveform
P
u
lsed
M
o
d
e
On
ly
Time
– Pulse On
Ton
This is the duration that the pulsed waveform is on in ms.
(See Diagram 1)
Time
– Pulse Off
Toff
This is the duration that the pulsed waveform is off in ms.
(See Diagram 1)
Time
– Total Cycle
Tcyc
This is the total cycle time of the pulsed waveform in ms.
(i.e. Ton + Toff). (See Diagram 1)
% Duty Cycle %Duty
This is the ratio of the pulse on time (Ton)
versus cycle time (Tcyc). (See Diagram 1)
V Pulse mV cyc
This represents the RMS mV over one pulsed cycle.
(See Diagram 1)
mA Pulse mA cyc
This represents the RMS mA over one pulsed cycle.
(See Diagram 1)
Watts Pulse Wcyc
This represents the RMS Watts over one pulsed cycle.
(See Diagram 1)
Ton Toff
Tcyc
mV
mA
Watts
mVcyc
mAcyc
Wcyc
CF
Diagram 1 Pulsed mode (ESU-2400)