Bayer HealthCare ADVIA 60, Руководство оператора

Страница: 88 / 128

8. INSTRUMENT CONFIGURATION
Page 8/14 075D0002-01
8.7. Patient Memory Card
8.7.1. Introduction
This menu is available only if the ADVIA 60-
CT
is equipped with a smart card reader.
The MEMORY program contains the seven following functions:
1 - MEMO : allows the operator to enable/disable the memory function.
2 - TRANSMISSION : allows the operator to select the transmission mode : printer or host.
3 - PRINT LIST : the purpose of this submenu is to print or to send to the host the list of the
patient identification stored on the memory smart card.
4 - TRANS. ONE : this submenu allows the operator to print or to send to the host one result only.
5 - TRANS. ALL : this submenu allows the operator to print out or to send to the host all the
results recorded on the memory smart card.
6 - TRANS. FROM TO : print out or send to the host results from XXX to YYY.
7 - CLEAR CARD : erase all the results recorded on the memory smart card.
From the SETUP menu move the cursor to the function
7
MEMO. CARD and press ENTER .
The memory menu is displayed:
MEMO. CARD > 1 MEMO < ON >
HH:MM 2 TRANSMISSION
8.6. BARCODE SETUP
The barcode reader can be set up according to the barcode label specifications (checksum).
From the SETUP menu, move the cursor to the function
6
BARCODE and press ENTER . The
BARCODE menu is displayed:
CHECKSUM > 1 YES
HH:MM 2 NO
Move the cursor to the required option and validate.
NOTE:
Make sure that the "US" identification mode has been set up for the use of the barcode
reader.