Bayer HealthCare ADVIA 60, Руководство оператора

Страница: 68 / 128

7. CALIBRATION AND QUALITY CONTROL
Page 7/14 075D0002-01
7.5.2.4. Run commercial control
Prepare the commercial control according to the specific instructions (temperature, mixing, etc ... ).
Install the calibrator tube in the correct holder position. Close the sample door to start the analysis
if this mode has been selected or close the sample door and press the cycle button located on
the front panel. When the analysis cycle ends, the first QC results menu is displayed :
7.5.2.5. Accepting/rejecting results
The results are compared to the control assay ranges stored on the memory card. If any result is
out of range, an H (High) or L (Low) will be shown on the display and the printout.
If a third count must be processed, a dollar ($) or a star (*) will be shown on the display and the run
is rejected.
If the HGB blank is not within acceptable limits a (!) is displayed and the run is rejected.
You must rerun the control. The following message appears when the
ENTER key is pressed:
If the results are correct (no star, dollar or ! will appear), the following menu appears:
The complete listing of results can be rewieved when moving the cursor up or down. Press the
ESC key to exit this menu.
Diag. 7.7
VALID LOW NO : ESC
YES : ENTER
RUN REJECTED
PRESS A KEY TO CONTINUE...
WBC RBC HGB HCT
XX.X H X.XX XX.X L XX.X