Bayer HealthCare ADVIA 60, Руководство оператора

Страница: 46 / 128

6. STARTUP AND SAMPLE RUN
Page 6/2 075D0002-01
Bayer HealthCare has a list of recommended sample collection tubes at your disposal.
6.2.2. Mixing
6.2. SAMPLE COLLECTION AND MIXING
6.2.1. Sample collection
Sample collection should be done on venous blood by the means of vacuum or atmospheric
sample collection tubes. It is possible to collect capillary blood into a microtainer with a minimum
volume of 100 µL (for example in a pediatric lab.) and analyze this on the
ADVIA 60-
CT
. EDTA is
the recommended anticoagulent for analysis on the ADVIA 60-
CT
.
Samples should be processed as soon as possible, and within 6-8 hours of collection.
6.1.2. Reagent pack
A low reagent level is indicated by the number of CBCs left (from 5 to 0) when the operator tries to
run an analysis cycle :
WARNING : PACK LOW LEVEL : 5
ESC TO EXIT
START TO CONFIRM
If this occurs operator has the choice either to run the cycle pressing the START key or to
replace the Reagent pack with a new one.
CAUTION: The sample collection tube should be filled with the exact quantity of blood
indicated on the tube itself. Any incorrectly measured blood sample collection will
show a possible variation in the results.
NOTE:
It is critical to assure that all the blood samples are thoroughly and gently mixed (with
a gentle up and down and rolling motion), prior to each sample aspiration.
BIOHAZARD: Wear personal protective equipment. Use universal precautions. Refer
to Appendix B for recommended precautions when working with biohazardous
materials.