Bayer HealthCare ADVIA 60, Руководство оператора

Страница: 40 / 128

5. DESCRIPTION
Page 5/2 075D0002-01
Diag.5.2
1 STARTUP key 6 DELETE key
2 STAND BY key 7 ENTER key
3 Identification Key (ID/SEQ) 8 ESCAPE key
4 Start analysis cycle key (START) 9 Display scroll keys
5 Numerical keyboard 10 Cycle light indicators
1 - STARTUP key: When this key is pressed, a startup cycle including
a cleaning and rinsing procedure is carried out. Detergent left in the
chambers is rinsed with diluent and the system is ready for the analysis
cycles. This cycle has a duration of approximately 130 seconds (this
cycle can be run 2 or 3 times if blank values are not within the acceptable
limits).
B - Command keys
4 - Start Analysis Cycle key (START): This key starts the analysis
when the manual mode for starting the analysis has been set up.
2 - STAND BY key: this key is used for shutdown at the end of the
working day. When this key is pressed, it is mandatory to carry out a
startup cycle before any analysis cycle. This cycle has a duration of
approximately 65 seconds.
3 - Identification Key (ID/SEQ): This key is used to enter the patient
identification (13 characters maximum, letters or numbers), and the run
number.
NOTE:
The patient identification can be entered also using the barcode reader when the
instrument is set up in the "US" identification mode.