Avocent Network Device SPC420, Инструкция по установке и эксплуатации

Страница: 206 / 432

186
DSView 3 Software Installer/User Guide
Data log files are not backed up by the DSView 3 software backup utility.
When a data log file is created, a companion signature file with the same name is created, but with
a .sig file name extension. This file is digitally signed using the DSView 3 software private key.
When a user wants to display the content of a data log file, the DSView 3 software will first verify
the digital signature to ensure the file has not been altered.
You may also export the DSView 3 system X.509 certificate and use its public key to validate the
signature of files, using external tools. See
System certificate and SSH key on page 46.
Data log licenses
A data log license is used for each enabled data log port connection. A direct SSH/Telnet session to
an appliance will not require or use a data log license for the DSView 3 software to capture data
logs for that appliance session. Only sessions related to appliance ports require a data log license.
A data log license is used when data logging is enabled on a port connection. When data logging is
disabled on a port connection, that license is freed and returned to the available pool.
The DSView 3 software ships with 32 available data log licenses - that is, 32 data logging sessions
may be enabled on appliance connections that support data logging. An add-on license key may be
obtained to support a certain number of additional data logging sessions or an unlimited number of
data logging sessions (site license). See
Licenses on page 54 for more information.
Configuring Data Logging
Complete the following steps to configure DSView 3 software data logging.
• Make sure you have sufficient data log licenses - one per port connection for which you want
to log session data; see
Data log licenses on page 186.
• Enable the SSH server; see Enabling the SSH server on page 187.
• Enable the Syslog server; see Enabling the Syslog server on page 187.
• Enable data logging on appliance and/or target device connections; see Enabling and disabling
data logging on units on page 188.
• Verify the data logging settings for each connection; see Verifying the data logging settings for
each connection on page 188.
• Customize the SSH server settings; see Viewing and customizing the SSH server settings on
page 189.
• Configure the notification mode for buffer warning events as SNMP; see Configuring the
buffer warnings events as SNMP on page 190.
• Specify where the data log files will be stored; see Specifying where data log files will be
stored on page 190.
• Specify archiving properties; see Archiving and deleting data log files on page 191.