Avocent Network Device SPC420, Инструкция по установке и эксплуатации

Страница: 281 / 432

Chapter 19: Using the Video Viewer
261
b. In the Local Cursor field, if you do not check the Inherit Default Settings checkbox,
enable the radio button for the desired cursor type. Check or uncheck the
Allow users to
override this setting checkbox.
c. In the Single Cursor Mode menu, indicate whether the Video Viewer will start up in single
cursor mode. Enable or disable the
Allow users to override these settings checkbox.
d. In the Release Keystroke menu, select the keystroke that will release the Video Viewer
single cursor mode. Enable or disable the
Allow users to override these settings checkbox.
e. In the Avocent Mouse Sync menu, select Enable or Disable . Enabling Avocent Mouse
Sync provides improved mouse tracking on the target device on supported system
configurations. If Avocent Mouse Sync is enabled, it is not necessary to disable mouse
acceleration on the target device. Enable or disable the
Allow users to override these
settings checkbox.
f. In the Avocent Mouse Sync Notification, select Display Notification or Do Not Display
Notification to indicate if you want the mouse acceleration pop-up warning to display
when a user launches a KVM session. Users cannot override this setting.
g. If you changed any settings, click Save .
7. To change toolbar settings (see Toolbar profile settings on page 258):
a. Click Toolbar in the side navigation bar. The Toolbar Settings window will open.
b. If this is not the default profile, the Inherit Default Settings checkbox may be enabled or
disabled. When enabled, no other settings in this window may be changed.
c. In the Hide Delay field, select the number of seconds for the toolbar hide delay.
d. To add functions to be displayed in the toolbar, select one or more functions from the
Available Functions column, then click
Add . The selected items will move to the Enabled
Functions column.
To add macros to be displayed in the toolbar, select one or more macros from the
Available Macros column, then click
Add . The selected items will move to the Enabled
Macros column.
To remove functions or macros from display in the toolbar, select one or more items from
the Enabled Functions or Enabled Macros column, then click Remove. The selected items
will move to the Available Functions or Available Macros column.
e. Enable or disable the Allow users to override these settings checkbox.
f. If you changed any settings, click Save . The enabled functions will be displayed first in
the toolbar, followed by the enabled macros.
8. To change video settings (see Video profile settings on page 258):
a. Click Video in the side navigation bar. The Video Settings window will open.
b. In the Color Depth field, choose the desired value. Enable or disable the Allow users to
override these settings checkbox.
If users are allowed to override this setting, you may also enable or disable the Prohibit
users from selecting a higher value checkbox. When enabled, users may select a higher