Avocent Network Device SPC420, Инструкция по установке и эксплуатации

Страница: 115 / 432

Chapter 6: Authentication Services
95
external authentication service
DSView 3 software supports external authentication. Once the
authentication service is added, you may map users to the DSView 3 software database
by using the Add User Account wizard. The username added in the DSView 3 software should
match the username configured in the server. For more information about adding users,
see
Adding User Accounts on page 231.
You may choose to associate users with internal DSView 3 software groups to control group level
access rights. Or, you may choose to map users to external groups and control group
level access rights using the service. There are two types of external groups
that can be used: the standard privilege level attribute, or a custom group name
attribute. To map users to external groups, use the DSView 3 software Add User Group
wizard and specify the group type. For more information, see
Adding User-defined User Groups on
page 242.
To add a external authentication service:
1. On the server that will be used as an external authentication service, add the
DSView 3 server as a client. Make a note of the configured shared secret and the
available authentication type(s) on the server.
2. From the DSView 3 Explorer, Click the Users tab.
3. Click Authentication Services in the top navigation bar. The User Authentication Services
window will open.
4. Click Add . The Add Authentication Service Wizard will appear.
5. The Provide Authentication Service Name and Type window will open.
a. Type a 1-64 character name for the authentication service.
b. Select from the Type menu.
c. Click Next .
6. The Specify Connection Settings window will open.
a. Type the address of the host or type the DNS host name in the Server Address
field.
b. Type the number of the port (from 1-65535) connecting to the host in the Port
Number field. The default port is 49.
c. Click Next .
7. The Establish Connection with Authentication Service window will open briefly. If the
external authentication service is contacted successfully, the Specify
Authentication Settings window will open.
a. Select the authentication type from the Authentication Type menu. Make sure it is one of
the available authentication types noted in step 1.
PAP - Password Authentication Protocol
CHAP - Challenge Handshake Authentication Protocol (default)