Avocent Network Device SPC420, Инструкция по установке и эксплуатации

Страница: 166 / 432

146
DSView 3 Software Installer/User Guide
• You may assign access control rights from a unit perspective. From this perspective, you select
one or more units, specify the users/user groups for which rights will be assigned, then allow/
deny the permission to perform the action for each user/user group. See
Unit Access Rights on
page 146.
• You may also assign access control rights from a unit group perspective. This is similar to
assigning access control rights for a unit, except all units that belong to the selected unit group
will be affected. See
Changing the unit group properties on page 215.
• You may also assign access control rights from a user perspective. You select a user account,
specify the units for which rights will be assigned, then indicate the permission to perform the
action (none, allow, deny or inherit) for each unit. See
User Access Rights on page 239.
• You may assign access control rights from a user group perspective. This is similar to
assigning access control rights for a user, except all users who are members of the selected user
group will be affected. See
User Group Access Rights on page 246.
Unit Access Rights
DSView 3 software administrators may assign unit access rights.
To add or remove access rights from a Units View window:
1. In a Units View window (see Accessing Units View windows on page 106):
• To add/remove access to one or more units, click the checkboxes next to the units, and
then click
Rights .
• To add/remove access to all units on the page, click the checkbox to the left of Name at the
top of the list, and then click
Rights .
2. The Unit Access Rights window will open. To add or remove a user or user group from the
Access Rights Assignment list, click
Edit List . The Unit Access Rights User Selection window
will open.
• To add one or more users or user groups, select the users or user groups from the Available
list, then click
Add . The users and/or user groups will be moved to the List to Update list.
• To remove one or more users or user groups, select the users or user groups from the List
to Update list, then click
Remove . The users and user groups will be moved to the
Available list.
Click OK . The Unit Access Rights window will contain the current list of users/user groups.
When a user/user group is added to the list, default access rights will be displayed.
3. To set access rights, select a user or user group from the User and User Groups list, then enable
or disable a checkbox in the Access Rights table for each access right.
• Allow - the access right is allowed for the user/group.
• Deny - the access right is denied for the user/group.
• Inherit - the access right is inherited from the unit group(s) to which the selected user/
group belongs. When Inherit is selected, the Allow and Deny checkboxes will become