manualshive.com logo in svg

Avaya IP403 Office, Руководство по установке, Страница: 82 / 115

Поделиться
Скачать
Avaya IP403 Office Скачать руководство пользователя страница 82

IP Office Installation 

Installation Manual 

Page 76 

IP Office 2.1 

40DHB0002USCL Issue 10c (11th May 2004) 

Industry Canada Notification (DoC) 

This equipment meets the applicable Industry Canada Terminal Equipment Technical Specifications. 
This is confirmed by the registration number. The abbreviation, IC, before the registration number 
signifies that registration was performed based on a Declaration of Conformity indicating that Industry 
Canada technical specifications were met. 

It does not imply that Industry Canada approved the equipment. 

''NOTICE: The Ringer Equivalence Number (REN) for this terminal equipment is 1. The REN assigned to 
each terminal equipment provides an indication of the maximum number of terminals allowed to be 
connected to a telephone interface. The termination on an interface may consist of any combination of 
devices subject only to the requirement that the sum of the Ringer Equivalence Numbers of all the 
devices does not exceed five.'' 

 

IP Office Operation in EU 

1.  999 and 112 calls must not be barred. Doing so will invalidate the approval. 

2.  All connections at the MDF shall be identifiable by suitable labeling. 

3.  The CE mark displayed on IP Office equipment indicates the systems compliance with the EMC, 

LVD, and R&TTE Directives and common technical regulations for Primary Rate and Basic Rate 
ISDN. 

4.  All ports for the connection of other non-telecommunications apparatus have a Safety Extra Low 

Voltage (SELV) safety status.  

 

IP Office Operation in New Zealand 

The grant of a Telepermit for any item of terminal equipment indicates only that Telecom has accepted 
that the item complies with minimum conditions for connection to its network. It indicates no 
endorsement of the product by Telecom, nor does it provide any sort of warranty. Above all, it provides 
no assurance that any item will work correctly in all respects with another item of Telepermitted 
equipment of a different make or model, nor does it imply that any product is compatible with all of 
Telecom's network services. 

 

Содержание IP403 Office




















































































































Отзывы:

Нет отзывов